Boru bükme makinesinin bakımı ve onarımı nasıl yapılır

1. When cleaning the oil tank of the pipe bending machine, clean the oil inlet filter of each pump.

2. Clean the oil tank and filter the hydraulic box once within 1-2 months after the equipment is put into use.

3. If the forward and backward cuts fail, first check whether the solenoid valve is working. If the solenoid valve is working normally, then check whether the sequence valve 6X3, the overflow valve YF-L20H4 or the one-way unloading valve 4HD3 are stuck by impurities. (This phenomenon usually occurs easily when the equipment is put into use). If there is a stuck phenomenon, disassemble it and clean it with gasoline or diesel, and then reinstall it.

4. All joints in the hydraulic pump station are equipped with oil-resistant rubber seals. If the seals are damaged or leaking, they should be replaced in time. 5. Check the fasteners of each part to make them in a tight state.